Smaller Machinery, Parts & Hoppers for Sale

We have goods and items of machinery for sale. Please contact Kingpak to discuss pricing and to view the equipment. (01457 862521 / email sales@kingpak.co.uk). All equipment is in full working order. Our factory/ family business is closing due to serious illness within the family and so machinery and goods are being sold. All goods will be sold as seen and will require collecting or transport costs and arrangements agreed within the sale. Some items may not be available immediately as they are still required until the business is closed.


 

Racking. Dexion Speedlock racking. Grey ends and Orange Beams with Wooden Boards (18mm) and board support lengths. We have three runs all of which are now dismantled and palletised ready for collection …

Run 1. 

Four Bays each 10ft / 3m long and 4ft / 1.2m deep.

Upright Height = 12 ft / 3.6 m.  Beams 10 ft 3″ / 3.1 m. Boards 4ft / 1.2 m x 10ft / 3m

The four bays consist of 5 uprights, 16 Beams and 8 boards. Each board has three supports for added security.

Run 2. 

6 Bays each 10ft / 3m long and 4ft / 1.2m deep.

Upright Height = 6 ft / 1.8 m.  Beams 10 ft 3″ / 3.1 m. Boards 4ft / 1.2 m x 10ft / 3m

The six bays consist of 8 uprights, 20 Beams and 14 boards. Each board has three supports for added security.

Run 3. 

1 Bay … 10ft / 3m long and 3ft / 0.9m deep.

Upright Height = 8 ft / 2.4 m.  Beams 10 ft 3″ / 3.1 m.

20170704_080930

The bay consist of 2 uprights, 2 Beams – with another 2 beams not being used (so 4 beams total).


 

Link Secure Storage Lockers. Grey Carcass, Blue Doors. Each Compartment has a hanging rail and two coat hooks. Individual keys and master key (will open any locker) present.

One nest of two lockers and one nest of three. Can be fixed together if required. We didn’t fix them as they are solid and heavy enough to free stand with no issues. Dimensions are:

5 x 1800mm (overall height) x300mm (Depth) x450mm (Individual locker height).


 

 

All of the following goods are SOLD …

 

Oil Cooled Electric Welder. (SOLD)

Pickhill Bantam units. We have TWO available. One on a trolley for mobile work and one without trolley for static use. Units have been taken from storage and cleaned but not tested.

Unit ONE – Welder with trolley.

Unit TWO – Welder without trolley. (SOLD)


 

Pillar Drilling Machine. (SOLD)

Has had light use when required.


 

Various Extruder Spare Parts. (SOLD)

Air ring components, iris components and thermo couples.


 

The following goods are SOLD

 

Material Hoppers.  (SOLD – All four)

500 kgs capacity per hopper. Hoppers will stack very safely ‘two up’ giving the facility to hold 1,000 kgs of LDPE material. We have four hoppers, all in very good clean condition.

The Hoppers open to allow flow of material from one to another when stacked. The opening is a simple but very secure plate which is pulled out to release material.

There are fork truck specific load points so that the Hoppers can be moved and lifted into place very safely using a Fork Lift Truck.


 

Heavy Duty Industrial Scales. (SOLD)

500kgs in 1kg increments. Stood on purpose built frame which is the correct height to enable putting items straight on the scales without bending down to floor level.

 


 

Motors. (SOLD)

These have not been wired to power and checked, but are spinning by hand without restriction.

Motor 1.

Motor 2. (SOLD)


 

Advertisements